Turning Power On/Off; Turning On The Main Power - Sharp PN-C605B Operation Manual

Caution
• When all connections are complete, turn on the power.
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.

Turning on the main power

When the main power is turned on, the power LED lights. Wait
until the screen is displayed.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main
plug.
18
E

Turning Power On/Off

Main power switch
Turning power on/off
Press the remote control POWER button or the monitor
POWER button to turn the power ON/OFF.
You can also turn the power ON/OFF by pressing the
MONITOR ON button/MONITOR OFF button on the remote
control unit.
Power LED
Status
Blue lit
Orange lit
Blue flashing
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in input signal waiting mode and you press
the POWER button, the monitor enters power on.
POWER HDMI 1 D-SUB INPUT BL OFF VOL ─ VOL +
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode
FREEZE