Turning Power On/Off - Sharp PN-LC752 Manual

Caution
• Turn on the monitor first before turning on the computer or
playback device.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
Turning on the main power
PN-LC652
Main power switch
When you turn on the main power, the monitor enters standby
state.
Off mode, when main power is off.
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• For a complete electrical disconnection, pull out the main plug.
8
E

Turning Power On/Off

Main power switch
Turning power on
1. Press the POWER button.
Status
Power on
Blue lit
Sleep state (Backlight off)
Orange lit Power off (Standby state*
Orange flashing (at approx. 2
Power off (Standby state*
seconds interval)
Orange flashing (at approx. 1
Input signal waiting state
second interval)
*1 When "Power save mode" is set to on.
Standby mode when "Wake On LAN" is set to off.
Networked standby mode when "Wake On LAN" is set to on.
Networked standby mode allows the monitor to be turned on
via network (LAN, RS-232C, and HDMI CEC).
*2 When "Power save mode" is set to off.
Power LED POWER button
Status of the monitor
1
)
2 )