Manual Deforst Operation; Name And Functions Of Indications On Remote Controller - Toshiba RAS-B05J2KVG-E Service Manual

9. MANUAL DEFORST OPERATION

To defrosting the heat exchanger of the outdoor unit during Heating operation.
Press and hold
[ ] as picture 1 for 2 sec.
MODE

9-4-3. Name and Functions of Indications on Remote Controller

[Display]
All indications, except for the clock time indicator, are displayed by pressing the
1.
Transmission mark
This transmission mark
remote controller transmits signals to the indoor unit.
2.
Mode indicator
Indicates the current operation mode.
(A : Auto, : Cool,
3.
Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
1
2
MODE
8
: for 5 sec. then remote control display will show
Hi POWER
ECO
SILENT
OFF
indicates when the
: Dry, : Heat, : Fan only)
6
3
Hi POWER
ECO
SILENT
OFF
4
7
5
9
4
. FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW +
HIGH
Indicates AUTO when the operating mode is
: Dry.
5.
OFF TIMER indicator
Indicates when the OFF timer is setting press the
OFF timer button and select off time by TEMP
botton after that back to press OFF timer again to
timer setting and push CLEAR button to stop the
operation.
6.
Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
7.
ECO indicator
Indicates when the ECO is in activated.
Press the ECO/
operation.
8.
A, B change indicator remote controller
When the remote controller switching function is
set, "B" appears in the remote controller display.
(When the remote controller setting is "A", there is
no indication at this position.)
9.
SILENT indicator
Indicates when the SILENT operation start.
Press the ECO/
operation.
➝
NORMAL
- 57 -
FILE NO. SVM-19001
button.
, MED , MED +
, and QUIET ) can be shown.
button to start and stop
button to start and stop
➝
ECO SILENT
,