Table of Contents
Advertisement
The Arm Board is manually adjustable 180°
from head end to leg end horizontally; it can
be used when the angle of the tabletop is no
more than 15 degrees above or below
horizontal. The Multi-task Arm Board is
available for purchase separately, which can
be used for any angle.
Adjust Arm Board to desired angle:
1.
Clamp Arm Board to the side rails.
2.
Locate ratchet release and pull to release (spring-loaded) the ratchet lock, and at the
same time adjust the arm board to the desired angle, and let go of ratchet release to
lock the arm board.
Figure 5-13:
5.3.4
Restraint Strap
Strap patient's legs with Restraint Strap to the side rails by using the attached hooks on either
end of the Restraint Strap. Adjust the length of Restraint Strap so that it is taut and holds the
patient in place.
5.3.5
Cassette Top
An optional accessory of four-section cassette top is available from NUVO for B2AV800 Series
table. An X-ray cassette can be inserted between tabletop and the cassette top from the left
for right side of table. Align and push the pins of cassette top into holes on the tabletop so
they fit tightly, then place the patient onto the table top. During surgery, the X-ray cassette can
Figure 5-12:
Figure 5-14:
5-25
B2AV800 Series Surgical Table
IM-B2AV800-E01
Advertisement
Table of Contents
