CPI INDICO 100 Series Operator's Manual page 5

CPI Canada Inc
INTRODUCTION
Congratulations!
You have acquired the CPI Indico 100 series high frequency X-ray generator. This generator features
state-of-the-art computer-based control to ensure minimum patient dose, excellent repeatability, and
superior contrast. The operator control functions are designed to be simple and user-friendly.
The AEC (Automatic Exposure Control) and APR (Anatomical Programming) features give you controlled
exposure factors, automatically optimized for the radiological study selected.
INDICO 100 MAIN FEATURES
•
Models available in maximum output power of 30 to 80 kW, in both radiographic and fluoroscopic models.
•
Full 150 kV capability for all models.
•
Smaller, lighter modular design.
•
Constant dose output due to kVp and mA regulation during exposures.
•
User-friendly controls.
•
Large LCD panel display for APR and utility routines.
•
User-friendly system configuration.
•
APR techniques may be modified by the operator.
•
ms and mAs limits for AEC may be operator set.
•
Provisions for APR / tube downloading.
•
Extensive self-diagnostics with operator prompt messages.
•
Serial RS232 communications interface.
•
May be programmed for APR operation only or both APR and manual technique selection.
•
Time and mA / mAs selections are to IEC standards.
•
Programmable setup, calibration and APR routines (using an external computer).
•
Choice of six fluoro kV to rad kV transfer curves (R & F units only).
•
Choice of four kV vs mA curves for ABS (automatic brightness stabilization) circuits (R & F units only).
OPTIONS
•
Dual speed starter for automatic high / low speed selection.
•
Two-tube capability.
•
Pedestal mount for operator control console.
•
Automatic Brightness Stabilization (ABS) for consistent imaging (AUTO kV / mA or kV only).
•
Remote fluoro controller for R & F table side operation.
•
Digital imaging interface.
•
Trauma control console.
•
Remote exposure hand switch.
•
High level fluoro for therapy simulators.
SAFETY NOTICE: This manual contains important operating and safety information. An understanding
of this information is critical to the safe operation and long term reliability of your
equipment. Please ensure that you read the warning notices before using this
equipment.
Indico 100 Series Operator Manual 740953-00 Rev. A
1
Page 5