CPI INDICO 100 Series Operator's Manual page 32

5
Programming the Console
Console
The CONSOLE menu displays console parameters that may be changed to suit operator
preferences.
1. From the UTILITY menu select CONSOLE.
2. Select SLOW KEY REPEAT. Press the + or - button to select the speed at which displays
change while the button is pressed for the first 5 counts.
3. Select MED KEY REPEAT. Press the + or - button to select the speed at which displays
change while the button is pressed for the next 5 counts.
4. Select FAST KEY REPEAT. Press the + or - button to select the speed at which displays
change while the button is pressed after 10 counts.
5. Select SPEAKER VOLUME. Press the + or - button to set the speaker volume in the
range 1 to 15.
6. Select LCD SCREEN. Press button to toggle between normal and reverse display for the
LCD display screen.
7. Select APR MODE. Press selection button to toggle between NO and YES. Selecting
YES disallows changes to the
mode. This must be set to NO to allow switching between
operating mode.
8. Select EXIT to return to the UTILITY menu.
9. Select EXIT to return to the GENERATOR SETUP menu.
Page 32
SLOW KEY REPEAT: 200MS
MED KEY REPEAT:
FAST KEY REPEAT:
SPEAKER VOLUME:
EXIT
Rev. A
* CONSOLE *
150MS
75MS
15
/ mAs / mA/ms selections when in normal operating
Indico 100 Series Operator Manual
CPI Canada Inc
LCD SCREEN
APR MODE: NO
+
-
/ mAs / mA/ms in normal
740953-00