CPI INDICO 100 Series Operator's Manual page 21

CPI Canada Inc
Fluoro ON Indicator
Note: The fluoro kV and fluoro mA buttons are only functional when ABS is
switched OFF.
Fluoro kV up / down buttons and display
Fluoro mA up / down buttons and display
Time zero and accumulated time buttons and display
Pulse fluoro frame rate buttons and display
Indico 100 Series Operator Manual
When fluoro is on, the fluoro "eye" symbol will light. This is
accompanied by an audible tone from the console.
To increase kV, press +.
+
To decrease kV, push -.
lit indicates that ABS is selected, manual kV
control is therefore not available.
To increase mA, press +.
+
To decrease mA, press -.
lit indicates that ABS is selected, manual mA
control is therefore not available.
To reset the time display to zero, press
To display accumulated time, press
symbol
time is displayed.
To reset the accumulated time, press
the accumulated time is displayed.
To increase the PPS (Pulses Per Second) rate,
+
press +. To decrease the PPS rate, press -.
Only active when pulsed fluoro is switched ON.
740953-00
will light to indicate that accumulated
Rev. A
3
Console Controls
.
once. The
when
Page 21