CPI INDICO 100 Series Operator's Manual page 29

CPI Canada Inc
PROGRAMMING THE CONSOLE
MAKING CHANGES TO PRE-PROGRAMMED APR TECHNIQUES
The default techniques associated with the anatomical views in the APR display window may
be edited if desired. To do this, follow the steps in this chapter.
ENTERING INTO PROGRAMMING MODE
1. Start with the generator switched OFF.
2. Press and hold the
console.
3. When the console finishes its power-on sequence, and the ENTER PASSWORD prompt
is displayed, press the
Access is now provided to the following groups of functions. These will be discussed in
sequence.
UTILITY
APR EDITOR
EXIT SETUP
Indico 100 Series Operator Manual
button while pressing the power ON button on the operator
button 4 times to access the following menu:
* GENERATOR SETUP *
UTILITY
EXIT SETUP
740953-00
APR EDITOR: DISABLED
• Set Time & Date
• Error Log
• Statistics
• Console
• Enables/disables changes to the APR
techniques
• Returns to normal operation i.e. non
programming mode.
Rev. A
5
Page 29