CPI INDICO 100 Series Operator's Manual page 17

CPI Canada Inc
Note: The rate of scrolling for the kV, mA and time display increases if the
buttons are pressed continuously. To return to the slowest scroll rate,
release the button(s) and start again.
kV up / down buttons and display
+
mA and mAs up / down buttons and display
+
Time (ms) up / down buttons and post-mAs / ms display
+
Density up / down buttons and display
+
Indico 100 Series Operator Manual
To increase kV, press +.
To decrease kV, press -.
Displays demanded kVp of the exposure.
To increase mA or mAs, press +.
To decrease mA or mAs, press -.
Displays mA when AEC or mA/ms selected.
Displays mAs when mAs is selected.
To increase time (ms), press +.
To decrease time (ms), press -.
Displays AEC, or shows backup mAs or
backup ms when AEC selected.
No display when mAs selected.
Displays time (ms) when mA/ms selected.
Displays POST mAs after an AEC exposure
is completed.
Buttons operate only in AEC mode.
To increase dose, press +.
To decrease dose, press -.
The range is typically -5 to +5. (Installer
programmable to have a range of up to -8 to
+8).
Varies the optical density by changing the dose.
Each density step will change the dose by
approximately 10% (Installer programmable).
740953-00 Rev. A
3
Console Controls
Page 17