CPI INDICO 100 Series Operator's Manual page 38

6
Error Codes and Messages
MESSAGE
AEC DENSITY LIM
ANODE HEAT WARN
FL TIMER WARN
INVALID PARAM
HOUSE HEAT WARN
GEN DUTY WARNING
Page 38
PROBLEM
Requested density not programmed.
Anode has exceeded programmed
warning level.
Fluoro interval timer ≥ 5.0 mins.
Generator detected invalid parameter
within received message, message
ignored.
X-ray tube housing heat has exceeded
housing warning limit.
The X-ray generator has exceeded its
duty warning limit.
Rev. A Indico 100 Series Operator Manual
CPI Canada Inc
ACTION
Select another
density or request
those steps be
programmed.
Consult your service
representative for
this.
Wait for anode to
cool.
Reset fluoro timer.
Select valid
parameter.
Wait for housing to
cool.
Re-evaluate
technique factors.
Allow generator to
cool if possible. If
exposures are
continued, serious
generator damage
may result due to
overheating.
740953-00