Swing Louvre Function - Mitsubishi Electric MJ-E82GH-H Instruction Manual

Swing Louvre Function

The louvre can be made to swing. Select from the 4 possible settings to suit the purpose.
The swing monitor turns off.
The louvre moves slowly through
the last 30° of the swing, as the
time taken to traverse the rear arc is
shorter than that for the upward arc
when moving at a constant speed.
(how to read the swing monitor)
The swing operation stops when the power
cord is unplugged.
The level of noise emitted from the unit varies
according to the angle of the air-flow.
The louvre may stop up to a maximum of 8 seconds
to correct its position, after which it will start moving
again.
If the louvre is knocked out of the desired angle,
readjust by following the above steps.
Stop the louvre in the vertical position when using the
unit against a wall. Blowing air at the wall may cause
staining