Setting Modes - Mitsubishi Electric MJ-E82GH-H Instruction Manual

Setting Modes

LOW, MILDEW GUARD and LOW TEMP
LOW mode is for when you want to leave the dehumidifier on. MILDEW GUARD mode suppresses mildew growth.
LOW TEMP mode is for preventing condensation or when the room temperature is low.
The dehumidifier operates regardless of the humidity level.
The unit operates intermittently for 2-4 hours a day (24
hours). The operating time varies depending on the humidity.
The unit continues to operate when the humidity does not
decrease.
• Humidity 40%
• Humidity 50%
Refrain from turning on ventilation fans or opening windows or doors as this lowers performance.
Mildew growth may still occur due to the fungus type and conditions of the room.
E.g. Rooms that contain excessive condensation, bathrooms, and places with bad airflow (insides of closets and
behind furniture).
This mode does not remove existing mildew.
Do not use in conjunction with OFF Timer mode. Effects may not be achieved.
When the temperature is low, condensation may still form on windows exposed to the outside air even when
LOW TEMP mode is operating.
The unit lowers humidity levels automatically once a day, suppressing
mildew growth.
Approx. 2 hours
Approx. 4 hours
The unit operates continuously automatically controlling airflow according to
room temperature. The air flow is strongest below 15°C.
The use of LOW TEMP mode is recommended when the Low temperature
indicator is lit.
Mildew is unable to produce new spores if dried as mycelia. The Mildew Guard feature
applies this principle. (However, the spores themselves are resilient to dry conditions.)
<Research paper by Dr. K. Abe of the Environmental Biology Research Center>
ON
24 hours 24 hours
Standby
Standby
Dehumidifies
Dehumidifies
"Identification of Aspergillus and Penicillium"
Repeat