On Timer Operation - Mitsubishi Electric MJ-E82GH-H Instruction Manual

ON timer operation

To set
1
2
3
Select desired operating mode.
Set drying inside as desired.
4
Select the desired setting.
5
The unit informs you if you forget to press the
Power button by making the Timer display and
Mode indicator blink and sounding an alarm for
1 minute.
The ON timer can be set for 1 to 9 hours.
Set the timer when the power is switched off.
The following is an example of a display indicating
AUTO dehumidifying (set to 60%), swing set to
WIDE and the ON timer set for 5 hours.
• The time remaining until the unit switches itself
on is indicated in increments of one hour.
• When the set time is reached, the unit switches
itself on.
To cancel
Press the Power button.
Drying inside is deactivated when the ON timer is set
during drying inside operation.
The ON timer function is not operable using a
commercially-available timer plug outlet.