Advertisement

Unit/Control Panel/LCD Panel
(Low Temperature/Defrost/High Humidity)
To turn ON/To turn OFF
Reading the humidity display/Tank full lamp
EASY DEHUMIDIFYING/INTELLIGENT
LAUNDRY
LOW/MILDEW GUARD/LOW TEMP/AUTO/
AIR PURIFIER
OFF timer operation/ON timer operation
In order to ensure correct usage, please read
this instruction manual carefully and retain it
for future reference.
Before accepting the Warranty at the time of
purchase, please make sure that the date of
purchase, place of purchase and other items
are correctly filled in the form.

Advertisement

Table of Contents
loading

Summary of Contents for Mitsubishi Electric MJ-E82GH-H

  • Page 1 Unit/Control Panel/LCD Panel (Low Temperature/Defrost/High Humidity) To turn ON/To turn OFF Reading the humidity display/Tank full lamp EASY DEHUMIDIFYING/INTELLIGENT LAUNDRY LOW/MILDEW GUARD/LOW TEMP/AUTO/ AIR PURIFIER OFF timer operation/ON timer operation In order to ensure correct usage, please read this instruction manual carefully and retain it for future reference.
  • Page 2 Recommended Ways of Using the Unit Depending Combine operating mode and swing louvre function to get optimum results. I want to What set it to should I set it to? INTELLIGENT EASY AUTO LOW TEMP MILDEW LAUNDRY DEHUMIDIFYING GUARD The unit operates The unit maintains The unit changes the The unit operates...
  • Page 3 on Purpose Frequently Asked Questions In winter, because the temperature is lower than in summer, the effects of the dehumidifier decrease dramatically as shown in the graph below. Although less water collects in the tank, this is not a malfunction. AIR PURIFIER Summer (humidity) Winter (dampness)
  • Page 4 The internal fan rotates at high speeds, and such actions may result in Continuing to operate the unit may result Contact your dealer or Mitsubishi Electric This may result in Service Centre for consultation. . Refer servicing to your dealer or...
  • Page 5 CAUTION Such a leak around the unit may cause This results in poor ventilation and may cause The unit may tip over causing The floating element will not be able to detect a full tank resulting in water leakage, which may Water may leak into the unit adversely affecting electric insulation and cause Exposure to water may result in...
  • Page 6: Tips On Dehumidifying

    Precautions (Cont.) Tips on Dehumidifying CAUTION Losing your footing while carrying the unit may cause • Direct the louvres at the laundry. • Space laundry to improve airflow. The water in the tank may leak and Do not allow debris to clog the filter/hose as this may cause Drying times will vary depending on the nature of the laundry and the room temperature.
  • Page 7: Names And Functions Of Parts

    Names and Functions of Parts Front Supplied with unit. Set before use. Do not block. The silver ion filter has a two-layer construction consisting of a white particle filter and a blue air- freshener filter. <Particle filter> The fine particle filter removes pollen* and dust particles.
  • Page 8 Names and Functions of Parts (Cont.) Control Panel MADE IN JAPAN Current mode lights. For switching from one Sets swing louvre operating mode to another. direction or locks it into position. Switches modes. This is used to set the target humidity. Sets timer.
  • Page 9 Flashes when drying inside in progress. MJ - E82GH - H Activate/deactivates drying inside. Lights during air purifier only operation. Switches to air purifier only operation. Lights when unit is ON. Use this to switch the unit ON and OFF. All modes include This lights up to warn that the dehumidifier and air purifier...
  • Page 10: Things To Be Aware Of

    Things to Be Aware of Before Using Your Setting the silver ion filter The silver ion filter is supplied with the unit at time of purchase. Fit the silver ion filter before using the unit. If you pour cold water into a cup, the air around it becomes cold, causing water droplets to form on the surface of the cup.
  • Page 11 Dehumidifier Setting the supplement cartridge The unit disperses antioxidants during dehumidifier and air purifier operation by setting the supplement cartridge. Move the louvre by hand to confirm that the case does not touch the louvre. Case Do not disassemble or tear the bag inside the cartridge. Follow the procedures described above.
  • Page 12: Turning The Unit On And Off

    Turning the Unit ON and OFF To turn ON CURRENT indicates the Example current humidity. Current humidity range is between 30–80%. To start dehumidifying, select the desired mode. • Humidity levels below 30% are displayed as 30%. • Humidity levels above 80% are displayed as 80%.
  • Page 13: Easy Operation

    Easy Operation The unit automatically monitors room temperature/humidity alleviating the necessity to make minor adjustments. Use EASY DEHUMIDIFYING for dehumidifying a room and INTELLIGENT LAUNDRY for drying clothes. The airflow or louvre operation may stop according to the humidity level. The unit may stop before the laundry dries because of a full tank.
  • Page 14: Setting Modes

    Setting Modes LOW, MILDEW GUARD and LOW TEMP LOW mode is for when you want to leave the dehumidifier on. MILDEW GUARD mode suppresses mildew growth. LOW TEMP mode is for preventing condensation or when the room temperature is low. The dehumidifier operates regardless of the humidity level.
  • Page 15 AUTO AIR PURIFIER When you want to set the humidity level. To operate only the air purifier. The MODE button can also be used to select To return to the previous mode, press the air AUTO. purifier button again. The air passes through the silver ion filter •...
  • Page 16: Swing Louvre Function

    Swing Louvre Function (how to read the swing monitor) The louvre can be made to swing. Select from the 4 possible settings to suit the purpose. The swing operation stops when the power cord is unplugged. The swing monitor turns off. The louvre moves slowly through the last 30°...
  • Page 17: Drying Inside

    Drying Inside The inside of the unit can be dried to suppress mildew growth on the cooler. On days the dehumidifier is used, drying inside is recommended. Automatic operation Manual operation To activate drying inside after every use. To activate drying inside by pressing a button. (Drying inside lamp lit) The Drying inside lamp flashes, the humidity indicator turns off, and the louvre stops in the...
  • Page 18: Using The Timer

    Using the Timer The OFF timer can be set for 1 to 9 hours. OFF timer operation Set the timer when the power is switched on. To set To cancel Select desired operating mode. Select the desired setting. → Empty the water tank before operating. The unit stops and the Tank full lamp lights if the tank becomes full during operation.
  • Page 19: On Timer Operation

    The ON timer can be set for 1 to 9 hours. ON timer operation Set the timer when the power is switched off. To set The following is an example of a display indicating AUTO dehumidifying (set to 60%), swing set to WIDE and the ON timer set for 5 hours.
  • Page 20: Using The Child Lock

    Using the Child Lock Carrying the Unit To lock The child lock is switched off when the power cord is unplugged. When the child lock is activated, the other buttons are inoperable. Deactivate the child lock Use the wheels as shown above when moving the to use the other buttons.
  • Page 21: Removing Water From The Tank

    Removing Water from the Tank The unit automatically shuts down and lights the Tank full lamp when the tank (approximately 3.8 L) is full. Empty the tank. Open the front door. Do not remove or dismantle the float. Grasp handle and Pour the water out slide out.
  • Page 22: Continuous Drainage

    Continuous Drainage If a drain is available, the unit can continuously drain excess water by attaching a commercially available hose (internal diameter 15 mm). The unit can be operated for extensive periods without the need to empty the water tank. CAUTION Long enough to reach the drain.
  • Page 23: Maintenance

    Maintenance Do not use detergents, cleaning agents for heat exchange equipment, abrasive powders, chemically treated dusters, gasoline, benzene, thinners or other solvents, as they can damage the unit or the water tank, which may result in leakage. Cleaning Once every two weeks Water tank •...
  • Page 24: Once Every Three Months

    Maintenance (Cont.) Once every three months Soak the filter in water about once every three months. Silver ion filter For maintenance procedures see 2 Remove by 1 Remove by holding holding the the bottom. tabs. Performance is unaffected even if the metal fins inside the main unit are slightly bent.
  • Page 25: Replacing Consumable Parts

    Replacing Storage and Consumable Parts Disposal Replace them when necessary. The dehumidifier can still operate without replacing the supplement After switching the unit off, leave for one day until cartridge. Replace as desired. any water inside has had time to run off, then carry out the following steps.
  • Page 26: Troubleshooting

    Troubleshooting Dehumidified air passes through heating coils causing it to warm (this unit is not a cooler). This is not a malfunction. Check to see if the temperature/humidity is low. Low room temperature/humidity reduces dehumidifying effectiveness. Confirm the current humidity reading (in winter, the air is cooler reducing the amount of water collected).
  • Page 27 Check to see if the unit is on a slope or uneven surface. → Move to a sturdy even surface. Check to see if the pre-filter is clogged. → Clean according to the maintenance procedures. Operating the unit in small rooms or in tight spaces sometimes causes the sound to reverberate.
  • Page 28: Specifications

    If the unit malfunctions, contact your Mitsubishi dealer. Sole Agent in Hong Kong Mitsubishi Electric Ryoden Air-Conditioning & Visual Information Systems (Hong Kong) Limited. Head Office: Tel.: 2510 1505 Service Center: Tel.: 2427 8484 ZT936Z189H01...

Table of Contents