Mitsubishi Electric MJ-E100AR-H Instruction Manual

Mitsubishi Electric MJ-E100AR-H Instruction Manual

2 types of laundry mode independent air purifying function bathroom mildew guard


Quick Links

z 2 types of laundry mode
z Independent air purifying function
z Bathroom mildew guard
This appliance is designed for use in Hong Kong and
Macau only and please do not use in any other countries.
z This appliance is not intended for users (including children) with insufficient physiological, sensory or mental capabilities or
the lack of experience or knowledge, unless it is used under the supervision or instruction of a qualified safety personnel.
z Children should be supervised to ensure that they do not play with the appliance.
z If the power cord is damaged, it must be replaced by the manufacturer, its services agent in order to avoid a hazard.

Table of Contents



Table of Contents

Summary of Contents for Mitsubishi Electric MJ-E100AR-H

  • Page 1: Table Of Contents

    DEHUMIDIFIER MODEL MJ-E100AR-H English INSTRUCTION MANUAL Table of Contents z Recommended Ways of Using the Unit Features z Precautions z 2 types of laundry mode z Warning z Independent air purifying function z Tips on Dehumidification z Bathroom mildew guard...
  • Page 2: Recommended Ways Of Using The Unit

    Recommended Ways of Using the Unit When you want to dry laundry When you want to perform automatic operation ˜ INTELLIGENT LAUNDRY Reducing blowing sound and performing automatic operation ˜ NIGHT LAUNDRY When you want to perform continuous operation Tips on Drying Laundry ˜...
  • Page 3: Precautions

    Continuing to operate the unit may result in object, into the air intake/outlet. Do not fire or electric shock. touch the swing louvre. Contact your dealer or Mitsubishi Electric Service Centre for consultation. Remove water that has collected in the tank.
  • Page 4 Precautions (Cont.) CAUTION Do not cover an air outlet or Do not use the unit for special air intake with laundry, cloth, purposes, such as curtain, etc. preservation of food, art or scientific works. This results in poor ventilation and may cause heat generation/fire.
  • Page 5: Warning

    Tips on Dehumidification CAUTION Grasp the plug and remove Drain the water tank before use. from the power socket. When removing the plug from the power socket, do not pull Close the door and windows during operation. on it diagonally or by the cord as this may cause the projections/wiring to be damaged resulting in a short circuit, Drying laundry...
  • Page 6: Features Of This Dehumidifier

    Features of This Dehumidifier ˜ Room temperature may rise 2–4°C during operation. The dehumidifier does not have a cooler function. Due to heat produced during operation, the room temperature may rise 2–4°C. As a result, the unit may blow warm air, but this is not due to a malfunction. (During winter, the air may not feel warm as the temperature is below body temperature.) How does the dehumidifier work? If you pour cold water into a cup, the air around it becomes...
  • Page 7: Names And Functions Of Parts

    Main Air Outlet two special screws. If the unit has any malfunctions, Control Panel contact the Mitsubishi Electric Service Centre. Downward Louvre Downward Air Outlet Tank Lid Tank Guard Floating Element...
  • Page 8: Control Panel/Lcd Display

    Names and Functions of Parts (Cont.) Control Panel AIR PURIFIER Lamp AIR PURIFIER Switch DRYING INSIDE MODE Switch FULL Lamp Lamp Lights when the tank DRYING INSIDE LAUNDRY Lamps LCD Display is full of water. Switch POWER Lamp LAUNDRY Switch SWING LOUVRE Switch POWER Switch HUMIDITY SELECTION...
  • Page 9: Before Using Your Dehumidifier

    Before Using Your Dehumidifier Setting the silver ion Inserting the water filter tank correctly The silver ion filter is supplied with the unit at time Tank Lid of purchase. Please install it before using the unit. Tank Guard Remove the silver ion filter from Make sure the tank the polyethylene bag.
  • Page 10: Drying Laundry

    Drying Laundry When in the operation of INTELLIGENT LAUNDRY or NIGHT LAUNDRY, the unit will estimate the laundry drying time and stop automatically. z After the unit stops or the power plug is Blip inserted, the compressor will not be activated Press (for compressor protection).
  • Page 11 Tips on Drying Laundry Make full use of the laundry drying operation to shorten the laundry drying time. How to Hang Clothes z Pull to remove any wrinkles on the laundry. z Properly space the laundry for better ventilation (approximately 5 cm between the laundry).
  • Page 12: Dehumidifying

    Dehumidifying The operation mode can be selected accordingly to the situation. Blip Press to begin operation. z POWER lamp lights. z The operation mode is displayed. z Louvre opens, and blows air. Select the operation mode. <To select the dehumidifying mode and operate> Press P13–14 z The operation mode switches each time the button is pressed.
  • Page 13 EASY To relieve the discomfort from dampness, the unit operates intermittently after the automatic switching of airflow rate. Blowing air is used to control the room temperature rise if the room temperature is high. It is recommended when you want to maintain the Room temperature (°C) comfortable level of humidity.
  • Page 14 Dehumidifying (Cont.) MILDEW GUARD In this mode, the unit can dehumidify the bathroom to remove residual moisture and water drops, thus suppressing the mildew growth as a means of mildew prevention. To install the unit Install the unit in the changing room (entrance to the bathroom) (Do not install inside the bathroom) Blowing air from...
  • Page 15: Cleaning The Air (Air Purifier)

    (Example) Remove the pre-fi lter from the unit, and replace the silver ion fi lter. How to remove and attach the filter P9 Silver ion fi lter for replacement ˜ Type: MJPR-18WXFT Contact the Mitsubishi Electric Service Centre for purchase.
  • Page 16: Using Louvre

    Using Louvre The louvre can be made to swing. Select from 5 possible settings to suit the purpose. Louvre stopped Blip Blip Wide Blip Each time the switch Blip is pressed, Upward the swing Press Blip direction z Automatic louvre starts changes.
  • Page 17: Using Timer

    Using Timer OFF TIMER operation ON TIMER operation The OFF TIMER can be set between 1 to 9 hours. Set The ON TIMER can be set between 1 to 9 hours. the timer when the power is switched on. Set the timer when the POWER is off. 2 1 .
  • Page 18: Drying Inside Operation

    Drying Inside Operation The inside of the unit can be dried to suppress mildew growth on the cooler. The DRYING INSIDE operation is recommended after each use of the unit (approx. one hour). However, when continuous operation is being performed by continuous drainage (setting hose), there is no need to perform the DRYING INSIDE operation.
  • Page 19: Draining

    Draining When the tank is full (approximately 4.7 L), the unit automatically stops and the FULL lamp lights. Please empty the tank. When the water tank becomes full, the FULL lamp lights. z After pouring out the water, replace the water tank, and the FULL lamp will go out.
  • Page 20: Continuous Drainage

    Continuous Drainage If a drain is available, the unit can continuously drain water by attaching a commercially available hose (with an internal diameter of 15 mm) to the drain. As the unit does not stop due to the water tank being full, it can be operated for a long period of time without the need to empty the water tank.
  • Page 21: Maintenance

    Maintenance Do not use detergents, cleaning agents for heat exchange equipment, decontaminative powders, chemically treated cloth, gasoline, volatile oil, thinners, etc. They can damage the water tank or main body, which may result in leakage. When Cleaning the Unit Once Every Two Weeks Water tank •...
  • Page 22: Troubleshooting

    Troubleshooting z For the symptoms listed below, refer to the remedies listed right. Symptom Cause/Remedy z The unit blows out warm air because dehumidified air passes The unit blows warm air. through the re-heater. (There is no cooler function.) This is not a malfunction.
  • Page 23 If the symptoms persist even after following the prescribed remedies, or the error message does not disappear, unplug the power cord, and contact the Mitsubishi Electric Service Centre. z When unplugging and plugging back the power cord into the power socket, wait at least one minute before...
  • Page 24: Specifications

    Do not disassemble. Dispose according to the garbage regulations in your district. Sole Agent in Hong Kong Mitsubishi Electric (Hong Kong) Ltd. Head office – Tel.: 2510 0555, Service Centre – Tel.: 2427 8484 Web Site: Please complete the following form for your future reference.

Table of Contents