Specifications; General - FlowLine DataLoop LI25 Series Instruction Manual

DataLoop™ LI25 Level Controller

SPECIFICATIONS

Except where noted all specifications apply to operation at +25°C.

General

DISPLAY
DISPLAY
UPDATE RATE
OVERRANGE
UNDERRANGE
PROGRAMMING
METHOD
NOISE FILTER
RECALIBRATION
MAX/MIN
DISPLAY
PASSWORD
NON-VOLATILE
MEMORY
NORMAL MODE
REJECTION
ENVIRONMENTAL
CONNECTIONS
ENCLOSURE &
MATERIALS
MOUNTING
MN301034 rev D
Five digits
( -99999 to 99999
Four characters
(Engineering Units)
Bar graph
Trend arrows
Backlight
2.5/second
Display flashes 99999
Display flashes -99999
Four front panel buttons
Programmable from 1 to 199
Recalibration is recommended at least every 12 months.
Max/min readings reached by the process are stored until reset by
the user or until power to the meter is turned off.
Programmable password restricts modification of
programmed settings.
All programmed settings are stored in non-volatile memory for a
minimum of ten years if power is lost.
64 dB at 50/60 Hz
Operating temperature range: -30 to 65°C (-40°C allowed)*
Storage temperature range: -40 to 65°C
Relative humidity: 0 to 90% non-condensing
*Below -30°C, the LCD becomes less readable.
Removable screw terminals accept 12 to 22 AWG wire
1/8 DIN, high impact plastic, UL 94V-0, color: gray
GE Plastics NORYL
blend (PPE PS) Resin
®
GE Plastics LEXAN
1/8 DIN panel cutout required. Two panel mounting bracket
assemblies provided
0.60" (15.2 mm) high, 7-segment,
automatic lead zero blanking.
)
0.25" (6.4 mm) high, 14 segment.
20-segment, 0% to 100% indication.
Up and down trend indication.
Orange (intensity varies with signal)
®
N190X Polyphenylene Ether & Polystyrene
HP92W Polycarbonate (PC) Film
Instruction Manual
5