Input - FlowLine DataLoop LI25 Series Instruction Manual

DataLoop™ LI25 Level Controller
TIGHTENING
TORQUE
OVERALL
DIMENSIONS
WEIGHT
WARRANTY

Input

ACCURACY
FUNCTION
LOW-FLOW
CUTOFF
TEMPERATURE
DRIFT
DECIMAL POINT
CALIBRATION
RANGE
VOLTAGE DROP
EQUIVALENT
RESISTANCE
INPUT
OVERLOAD
6
Screw terminal connectors: 4.5 lb-in (0.5 Nm)
Mounting screws: 8.0 lb-in max. (0.9 Nm)
4.68" x 2.45" x 3.79" (119 mm x 62 mm x 96 mm)
(W x H x D)
5.7 oz (162 g)
See Warranty
±0.03% of span ±1 count,
square root and programmable exponent: 10-100% FS
Linear, square root, or programmable exponent
-99999 to 99999 (-99999 disables cutoff function)
50 PPM/C from -40 to 65C ambient
Up to four decimal places:
d.dddd, dd.ddd, ddd.dd, dddd.d, or ddddd
An Error message will appear if input 1 and input 2 signals are too
close together.
Input
Range
4-20 mA
Without Backlight
2.0 V maximum
100 Ω @ 20 mA
Over current protection to 2 A max.
Instruction Manual
Minimum Span
Input 1 & Input 2
0.40 mA
With Backlight
5.7 V maximum
285 Ω @ 20 mA
MN301034 rev D