HikRobot X86 Open Platform Quick Start Manual page 4

Available Model
X86 Open Platform
Symbol Convention
The symbols that may be found in this document are defined as follows.
Symbol Description
Provides additional information to emphasize or supplement important points of
the main text.
Indicates a potentially hazardous situation, which if not avoided, could result in
equipment damage, data loss, performance degradation, or unexpected results.
Indicates a hazard with a high level of risk, which if not avoided, will result in death
or serious injury.
Safety Instructions
These instructions are intended to ensure that the user can use the device correctly to avoid
danger or property loss.
Laws and Regulations
The device should be used in compliance with local laws, electrical safety regulations, and fire
prevention regulations.
Power Supply
 When wiring or dismounting, make sure that the device power is cut off, and do not operate
under electrification.
 Avoid contact with exposed circuit. When the device is powered on, avoid contact with
exposed junctions and parts.
 Use the power adapter provided by the regular manufacturer.
 Do not connect multiple devices to one power adapter, to avoid over-heating or fire hazards
caused by overload.
 Make sure the plug is properly connected to the power socket.
Transportation
 The device contains precision optical components and electronic components. During
transportation, storage and installation, incorrect operations like heavy pressure and violent
vibration should be avoided. Otherwise, the device may be damaged.
 Avoid sudden collision, and pack the device with the accompanied carton and cushioning
X86 Open Platform
·
iv
Quick Start Guide