Bosch Rexroth IndraMotion MLD Getting Started page 48

5-14
Commissioning and Parameterization
Configuring Analog Inputs of
Control Section
Fig. 5-13: Assigning a parameter to an analog output
Reading in analog voltage values requires configuring the respective PLC
parameters (P-0-1390,...) for the analog inputs. The example below
illustrates the assignment of the PLC parameter "P-0-1391, PLC input
WORD1 AT %IB2" to analog input 1.
See also Functional Description "Analog Inputs"
Fig. 5-14: Configuring an analog input in IndraWorks
Rexroth IndraMotion MLD
DB000226v01_en.tif
DB000227v01_en.tif
DOK-IM*MLD-F*STEP**V**-KB01-EN-P