Introduction - DTK PAM-0052V User Manual

High performance pentium pci mainboard
Table of Contents

Advertisement

CHAPTER 1
Preface
The motherboard is a 4-layer, 2/3 baby AT size high performance mainboard. It includes VIA
VT82C598MVP (MVP3) system chipset, Winbond W83877F super I/O chip.
Features
Processor
Intel Pentium/MMX, Cyrix 6x86L/6x86MX/M II and AMD K6/K6-2 CPU.
The mainboard can run with following speeds:
90, 100, 110, 120, 133, 150, 166, 200, 233, 250, 266, 300, 333, 350, 366, 380, 400 and
450MHz
Chipset
VIA VT82C598MVP (VIA MVP3 System Controller)
VIA VT82C586B (PCI ISA IDE Xcelerator)
Winbond W83877F Super I/O Controller
Cache Size
Built in 0/512KB Synchronised Pipelined Burst Mode SRAM to achieve the high Pentium
system performance.
Main Memory
Support Mixed Memory Technologies: Extend Data Output (EDO), Standard Page Mode
(SPM) and Fast Page Mode (FPM) and Synchronous DRAM (SDRAM) can work together.
Memory configurations from 8MB to 384MB are possible using combination of 1M*32 to
8M*32 module (32 bit no-parity 72-pin SIMM module) and 2M*64 to 16M*64 SDRAM
DIMM module.
Multi I/O
On board Multi-I/O supports two serial, one parallel ports and floppy drive controller.
Serial ports are 16550 Fast UART compatible.
Parallel port has EPP and ECP capabilities.
PS/2 mouse and keyboard supported.
IrDA supported.
Dual standard USB (Universal Serial Bus) ports supported.
PCI IDE
On board supports PCI Master IDE Controller, two connectors support up to four IDE
devices such as HDD, CD ROM drive and Tape Back-up drives, etc.
PCI Master IDE controller supports PIO Mode 3 and 4 devices, I/O data transfer rate can be
up to 17Mb/s. DMA mode transfer rate can be up to 22Mb/s.
Ultra DMA Mode supported. Transfer rate can be up to 33Mb/s.

INTRODUCTION

1

Advertisement

Table of Contents
loading

Table of Contents