Table of Contents
Advertisement
Award BIOS Setup Guide
Swap Floppy Drive: Choose Enabled or Disabled. This option lets end users to change the Drive
A: or B: to others.
Boot Up Floppy Seek: Choose Enabled or Disabled. Disabled provides a fast boot and reduces
the possibility of damage to the heads.
Boot Up NumLock Status: Choose On or Off. On puts numeric keypad in Num Lock mode at
boot-up. Off puts numeric keypad in arrow key mode at boot-up.
Boot Up System Speed: Choose High or Low. Set the CPU timing at Boot Up, the default is
high.
Gate A20 Option: Normal. The gate A20 is a device used to address memory above 1Mbytes.
Initially, the gate A20 was handled via a pin on the keyboard. Today, while keyboards still
provide this support, it is more common, and much faster, for the system chipset to provide
support for gate A20.
Memory Parity/ECC Check: Choose Enabled or Disabled. If memory modules with Parity of
ECC is installed.
Typematic Rate Setting: Choose Enabled or Disabled. Enabled will determines the typematic
rate defined by following two options.
Typematic Rate (Chars/Sec): The number selected 6,8,10... indicates how fast the number of
characters can response in one second.
Typematic Delay (Msec): The number selected indicates the time period between two identical
keys appear.
Security Option: Choose Setup or System. If system is selected, the password should be set.
PCI/VGA Palette Snoop: Select Disabled or Enabled.
If Enabled the MPEG Card can
synchronised with PCI/VGA.
OS Select For DRAM > 64MB: Select Non-OS/2 or OS/2. If the system memory is larger than
64MB and running OS/2, please select OS/2. However, if it use other operating system, please
select Non-OS/2. Furthermore, if the system memory is less than 64MB, the BIOS will ignore
this function.
HDD S.M.A.R.T. Capability: Choose Enabled or Disabled. Enabled will support the hard disk
S.M.A.R.T. feature (Self-Monitoring, Analysis and Reporting Technology).
25
Advertisement
Table of Contents
