4.11 IDE HDD AUTO DETECTION
When users can not find the Hard Disk information, it is very helpful to use this option.
1.
Choose this item and press <Enter>.
2.
After couple seconds, the screen will appear the Hard Disk information and
following message:
"SELECT PRIMARY MASTER OPTION(N=SKIP): N"
3.
Enter Y or N to confirm the acceptance then enter.
4.
The process will repeat for Primary Slave, Secondary Master and Secondary
Slave Hard Disks.
4.12 SAVE & EXIT SETUP MENU
When you select this function, the following message will appear at the centre of the
screen to assist you to Save data to CMOS and Exit the Setup.
4.13 EXIT WITHOUT SAVING MENU
When you select this function, the following message will appear at the centre of the
screen to assist you to Abandon all Data and Exit Setup.
Save to CMOS and Exit (Y/N)?
Quit Without Saving (Y/N)?
Award BIOS Setup Guide
35