Power Management Setup Menu - DTK PAM-0066I User Manual

4.5

POWER MANAGEMENT SETUP MENU

The Power Management Setup option is used to change the values of the chipset
registers for system power management functions.
Power Management
PM Control by APM
Video Off Method
Video off After
MODEM Use IRQ
Suspend Mode
HDD Power Down
Suspend Mode Option
Throttle Duty Cycle
ZZ Active in Suspend
VGA Active Monitor
Soft-Off by PWR-BTTN
Resume by Ring
IRQ 8 Break Suspend
A short description of the screen items follows:
Power Management: Available selection are "Disabled", "User Define", "Max Saving" and "Min
Saving":
"Disabled" will disable all the power saving functions.
"User Define" makes the time period waiting for Suspend Mode to be programmed.
"Max Saving" will set the time period waiting for Suspend Mode to be 20 seconds.
"Min Saving" will set the time period waiting for Suspend Mode to be 40 minutes.
PM Control by APM: Available options are "Yes" and "No". To choose "Yes" to let the Power
Management Function to be control by the MS APM software.
ROM PCI/ISA BIOS (2A59IG3B)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Disabled
: Yes IRQ [3-8, 9-15], NMI
: V/H SYNC+Blank Primary IDE 0
: Standby Primary IDE 1
: 3 Secondary IDE 0
: Disabled Secondary IDE 1
: Disabled Floppy Disk
: PowerOn Suspend Serial Port
: 62.5% Parallel Port
: Disabled
: Enabled
: Delay 4 Sec.
: Enabled
: Disabled
ESC: Quit
F1: Help
F5: Old Values
F7: Load Setup Defaults
Fig. 24
Award BIOS Setup Guide
** Reload Global Timer Events **
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
: Enabled
? ? ? ? ? ? : Select Item
PU/PD/+/-: Modify
(Shift)F2: Color
37