Chipset Features Setup - DTK PAM-0066I User Manual

Chapter 4
4.4

CHIPSET FEATURES SETUP

The Advanced Chipset Setup option is used to change the values of the chipset registers.
These registers control most of the system options in the computer.
Note: Change these Settings only if user is familiar with the Chipset.
Auto Configuration
DRAM Timing
DRAM Read Burst (EDO/FP)
DRAM Write Burst Timing
Fast EDO Lead Off
DRAM Enhanced Paging
Fast MA to RAS# Delay
SDRAM (CAS Lat/RAS-to-CAS)
SDRAM Speculative Read
Memory Hole At 15M-16M
PCI 2.1 Compliance
A short description of the screen items follows:
Auto Configuration: When Auto Configuration is Enabled, BIOS will sets the CPU Clock
according to CPU speed. Otherwise, set it manually.
DRAM Timing: Choose 60ns or 70ns according to the DRAM SIMM Module on the
motherboard.
DRAM Read Burst (EDO/FP): This sets the timing for burst mode reads from DRAM:
x444/x444
x333/x444
x222/x333
34
ROM PCI/ISA BIOS (2A59IG3B)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled DRAM Refresh Rate
: 60ns Power-Supply Type
: x222/x333 CPU Core Voltage
: x222
: Disabled
: Enabled
: 2 Clks
: 2/2
: Disabled
: Disabled
: Disabled
ESC: Quit
F1: Help
F5: Old Values
F7: Load Setup Defaults
Fig. 23
Read EDO and FP DRAM Timings are x-4-4-4.
Read EDO DRAM Timings are x-3-3-3, and FP
DRAM's are x-4-4-4.
Read EDO DRAM Timings are x-2-2-2, and FP
DRAM's are x-3-3-3.
: Disabled
: AT
: Disabled
? ? ? ? : Select Item
PU/PD/+/-: Modify
(Shift)F2: Color