With previous models, when the DC power was turned off,
the supply of power from the AC control board to machine
internal systems was stopped.
With this model, even after the main switch/DC power has
been turned off, a voltage of 5V still flows through the
machine to detect when the switch is pushed to turn the
power on.
Therefore, before performing any kind of machine
maintenance, you must do either of the following:
Physically remove the power cord from the outlet and wait
Push the power switch again
Slide 51
No additional notes
Important Notes
several minutes (approx. equivalent to the time it takes to
remove the rear cover).
51
OR-C2 Training