Motor
Slide 95
This is basically the same as the B793 finisher.
The stack feed-out belt feeds the stack out to the shift roller.
The pawl on the belt lifts the stack.
For booklet stapling, this pawl stays at home position, which is on the rear
side, so it does not interfere with booklet stapling.
The shift roller continues to feed the stack out.
The shift roller does not move from side to side in stapling mode.
The exit motor turns the shift roller.
Stack Feed-out
Stack feed-out motor:
Feeds the stapled stack
out of the jogger tray
Stack feed out belt HP
sensor: Detects when the
belt is at home position
The pawl is next to the
HP sensor at HP. This
keeps it away from the
stapler when it moves.
Pawl
HP
Sensor
95
OR-C2 Training