Ricoh D182 Service Training page 44

 The external keyboard bracket (used in MET-C1)
is not required.
 After installation, do the following SP
adjustments.
 Set SP5-748-201 bit 0 to 1 (default: 0).
 Set SP5-748-101 to 1 (default: 0).
 Switch power OFF/ON.
 After switching the power ON, if the default
setting icon is displayed and the default screen
is displayed, the operation panel is connected
normally.
Slide 44
No additional notes
Options
Smart Operation Panel
44
OR-C2 Training