This feature uses the SD card slot on the side of the
operation panel.
There is a procedure for user tool settings data, and
another procedure for SP settings data.
Import/export is possible between devices only if their
model type, region of use, and the following device
configurations match.
Input Tray
Output Tray
ADF
Whether or not equipped with a hard disk
Whether or not equipped with a finisher and the type of
For full details about this feature, see the following section
of the service manual:
Service Table > UP/SP Data Import/Export
Slide 32
No additional notes
Import/Export of Settings Data
finisher
32
OR-C2 Training