Ricoh D182 Service Training page 111

 SP modes
 6134: Stapling position
 6136: Booklet stapling position
 6132: Position of jogger fences
 6137: Folder position adjustment
 Dip switches
 SW100: Stapling position
 SW101: Jogger fence position
 If you adjust a dip switch setting, open and close
the finisher cover to enable the new setting. It is
not necessary to switch the power off/on.
Slide 111
 Jogger fence adjustment: This adjusts the distance between the front and rear
fences. If the fences are too far apart, skewing may occur. If the fences are too
close, the paper may be creased. Also adjust if the edges of stapled stacks are
untidy.
Adjustments
111
OR-C2 Training