Daikin Altherma R Hybrid Installer's Reference Manual page 105

To copy the system settings from the first to the second user interface
CHYHBH05+08AF + EHYKOMB33A
Daikin Altherma R Hybrid
4P471761-1E – 2020.10
Overview settings
01
00 00 01 15
04 05
08 09
0c 0d
Confirm Adjust
Result: The value to be modified is now highlighted.
4 Modify the value by using the
Overview settings
01
00 00 01 20
04 05
08 09
0c 0d
Confirm Adjust
5 Repeat previous steps if you have to modify other settings.
6 Push to confirm the modification of the parameter.
7 At installer settings menu, press
Installer settings
The system will restart.
OK
Confirm
Result: The system will restart.
If a second user interface is connected, the installer must first proceed below
instructions for the proper configuration of the 2 user interfaces.
This procedure offers you also the possibility to copy the language set from one
user interface to the other one: e.g. from EKRUCBL2 to EKRUCBL1.
1 Turn on the unit.
Result: When turned on for the first time, both user interfaces display:
U5:Auto address
Push 4 sec. to continue
2 Push for 4 seconds on the user interface on which you want to proceed to
the quick wizard.
Result: This user interface is now the main user interface.
INFORMATION
While using the quick wizard on the main user interface, the second user interface
displays Busy and you cannot interact with it.
02 00 03 00
06 07
0a 0b
0e 0f
Scroll
and button.
02 00 03 00
06 07
0a 0b
0e 0f
Scroll
to confirm the settings.
Cancel
Adjust
Tue 15:10
8 Configuration
|
Installer reference guide
105