Miele DGC 7580 Operating And Installation Instructions page 24

Overview
Descaling tablets
For descaling the steam oven
FlexiClip telescopic runners HFC 71
The FlexiClip telescopic runners can be
attached to any shelf level.
Push the FlexiClip telescopic runners
all the way into the oven before plac-
ing accessories on them.
The accessories will then automati-
cally sit securely in between the stop-
pers at either end of each runner and
be prevented from sliding off.
The FlexiClip telescopic runners can
support a maximum load of 33 lb
(15 kg).
24
Installing and removing the FlexiClip
telescopic runners

Danger of injury caused by hot
surfaces.
The steam oven gets hot during op-
eration. You could burn yourself on
the heater elements, oven compart-
ment, side racks, or accessories.
Allow the heater elements, oven
compartment, the side racks, and
the accessories to cool down before
fitting or removing the FlexiClip tele-
scopic runners.
The FlexiClip telescopic runners are in-
stalled in between the two rails that
make up a shelf level.
The FlexiClip telescopic runner with the
Miele logo is installed on the right.
When installing or removing the Flexi-
Clip telescopic runners, do not extend
them.
 Hook the FlexiClip telescopic runner
onto the lower rail of a shelf level at
the front (1.) and push it along the rail
into the oven compartment (2.).