Miele DGC 7580 Operating And Installation Instructions page 168

Frequently Asked Questions
Problem
The sensor buttons or
the motion sensor do
not respond.
A humming sound can
be heard during opera-
tion and after turning off
the steam oven.
After moving house, the
steam oven no longer
switches from the heat-
ing-up phase to the
cooking phase.
168
Possible cause and solution
You have selected the
ting. When this is activated, the sensor buttons and
motion sensor do not respond when the steam oven
is turned off.
 As soon as the steam oven is turned on, the sen-
sor buttons and the motion sensor will respond. If
you want the sensor buttons and the motion sen-
sor to respond even when the steam oven is
turned off, select the
ting.
The settings for the motion sensor are turned off.
 Change the settings for the motion sensor by se-
lecting
Settings
The motion sensor is defective.
 Contact Miele Customer Service.
The steam oven is not connected to the power sup-
ply.
 Check that the steam oven electrical plug is cor-
rectly inserted into the socket.
 Check if the breaker has tripped. If it has, contact
a qualified service technician or Miele Customer
Service.
If the display does not respond, there is a fault with
the controls.
 Touch and hold the  On/Off sensor button until
the display turns off and the steam oven restarts.
This noise does not indicate incorrect operation or
an appliance fault. The noise is made by water be-
ing pumped through the system.
The boiling temperature of the water has changed as
the altitude of the new location for the appliance dif-
fers from the old one by at least 984 ft (300 m).
 To adjust the boiling temperature, you need to
descale the appliance (see "Maintenance" under
"Cleaning and care for the steam oven").
Display | QuickTouch
Display | QuickTouch
| .
Proximity sensor
| Off set-
| On set-