IDTECK Star iCON100 Quick Install Manual page 4

3.3.1. Registration with the Card
<1>Select
3.3.2. Registration with Keypad
<2>Select
1. CARD: Card Reading
2. KEY: Enter 8-digit (iCON100SR: 10 digit) PIN
< INPUT THE ID INFORMATION >
ID : 8-digit (iCON100SR: 10 digit) card Number.
TS : Time Schedule code (Enter the default setting value "00")
- Enter such code for applying T/S
RD: Setup to use the reader or not (Enter the default setting value "3")
1 – To be read only by the reader 1
2 – To be read only by the reader 2
3 – To be read by the both readers
3.4 Delete Card (Select "ID DELETE" Menu by the Key '4' or '6')
ID DELETE
Display for ID Delete
Scanning ...
Card approach
PW (4 digit) + <ENT>
TS Code + <ENT>
Use Door or not + <ENT>
* Refer to the Manu setup
[______]
ID(8 digit)
PW____ TS__ RD_
+ <ENT>
PW (4 digit) + <ENT>
TS Code+ <ENT>
Use door or not + <ENT>
<ENT>
Enter 8-digit (iCON100SR: 10 digit)
card number to be deleted.
4
Quick Install Guide
12345678
PW____ TS__ RD_
* Input the ID information
ID Registered
Registration completed
12345678
PW____ TS__ RD_
* Input the ID information
ID Registered
Registration Completed
Enter Card No.
->__________
<ENT>