Installing Extension Cards - Bosch Rexroth IndraMotion MLC Operating Instructions Manual

IndraControl VPB 40.4
①
Fastening screw of the housing cover of 2-slot variants
②
Fastening screws of the housing cover of 4-slot variants
Fig. 10-3: Position of the housing cover and the fastening screw(s)
7. Remove the housing cover.
8. Plug the USB device into the USB port or plug the mSATA module or the
mPCIe module into the intended slot.
9. Mount the housing cover again.

10.1.5 Installing extension cards

NOTICE
Comply with all ESD protective measures while working with modules and
components! Avoid electrostatic discharges!
NOTICE
Install only released extension cards
●
The extension cards may only be installed by authorized personnel
●
The steps 1 - 3 are omitted if the control cabinet PC is not yet
mounted into the control cabinet.
1. Switch off the supply voltage.
DOK-MLC***-INDRACTRLV4-IT02-EN-P
Mounting, demounting and electric installation
Damages to the device due to electrostatic
discharges!
Risk of damage to the IndraControl VPB 40.4 or
corruption of application software due to the
use of non-released extension cards!
Bosch Rexroth AG
23/87