Internal Connections For Usb, Msata Modules And Mpcie Mod- Ules; Connecting Usb Device, Msata Module And Mpcie Module At The Internal Connection - Bosch Rexroth IndraMotion MLC Operating Instructions Manual

IndraControl VPB 40.4
10.1.3 Internal connections for USB, mSATA modules and mPCIe mod-
ules
①
USB 3.0
②
mSATA
Fig. 10-2: Position of the internal interfaces
Possible restrictions for the 2-slot variant:
When using a PCI card or a PCIe card with a card length > 145 mm,
the USB port is covered by the card. The USB port can then only be
used for very short USB sticks (e.g. mouse radio receiver).
Mounting an mSATA SSD hard disk module at the 2-slot variant:
The mSATA SSD hard disk module has to be installed before
installing a PCI card or a PCI card with a card length > 145 mm, as
the mSATA base of the plug-in card is covered after mounting such
cards.
10.1.4 Connecting USB device, mSATA module and mPCIe module at
the internal connection
It is recommended to install the modules to be mounted before
mounting the control cabinet PC into the control cabinet.
DOK-MLC***-INDRACTRLV4-IT02-EN-P
Mounting, demounting and electric installation
3
③
Bosch Rexroth AG
1
2
mPCIe
21/87