Installing Installation And Stations - Bosch REXROTH mMS 4.0 Operating Manual

48/68 Bosch Rexroth AG
Set-up, installation and commissioning
9.4

Installing installation and stations

Danger caused by lashing hoses.
Risk of injurycaused by compressed air!
Before switching on the system, make sure all compressed air hoses have

been depressurized.
Do not connect pneumatic hoses under pressure.

Dangerous electrical voltage.
Death or serious injury!
Extracting current from the mains supply is prohibited!

Do not make any modifications to conductive parts!

Pneumatic supply
The air feed should be connected to the station at the extreme left.

Connect the Ø6mm air supply hose to the maintenance unit.
Fig. 21: Compressed air feed connection
Training system mMS 4.0 | R901429162/04.16
CAUTION
CAUTION