Table of Contents
Advertisement
3. M12 DC Power Cable
Pin Assignment
The front panel of the Wall-mount Managed Switch provides one M12 DC power
5-pin male connector for DC power input. Please use the power cable with the M12
DC power 5-pin female connector from the Wall-mount Managed Switch package
for DC power input. The M12 DC power cable pin assignment is shown below:
M12 DC power cable pin assignment and wiring code
V1+
V1−
Make sure you connect the correct power pin to your DC power
source.
1. The wire gauge for the power cable should be in the range of 12
~ 24 AWG.
Note
2. The DC power input range is 9 ~ 48V DC.
V1 positive (+) pin = blue cable
V2+
V1 negative (-) pin = white cable
V2 positive (+) pin = black cable
V2−
V2 negative (-) pin = brown cable
7
Advertisement
Table of Contents
