Led Indicators; M12 Dc Power Cable Pinout - Planet ISW-800T-M12 User Manual

2.1.3 LED Indicators

ISW-800T-M12
LED Color
PWR 1 Green
PWR 2 Green
FAULT Green
LNK / ACT Green
ISW-804PT-M12
LED Color
PWR 1 Green
PWR 2 Green
FAULT Green
LNK / ACT Green
PoE In-Use
Port 5 to Orange
port 8

2.1.4 M12 DC Power Cable Pinout

The Industrial M12 Ethernet Switch front panel provides one M12 A-coded 5 pin
male connector for DC power input; please use the power cable with M12 A-coded
5 pin female connector from Industrial M12 Ethernet Switch package for DC power
input. The Industrial M12 Ethernet Switch power input port pinout is shown as
below
ISW-800T-M12
2
3
V2 V1
V2 V1
4 1
INPUT
DC 12V~48V
14
Function
Lit: indicate the power 1 has power.
Lit: indicate the power 2 has power.
Lit: indicate the either power 1 or power 2 has no power.
Lit: indicate the Switch is successfully connecting to the
network at 10/100Mbps.
Blink: indicate that the Switch is actively sending or
receiving data over that port.
Off: indicate the Switch is not connecting to the network
at 10/100Mbps.
Function
Lit: indicate the power 1 has power.
Lit: indicate the power 2 has power.
Lit: indicate the either power 1 or power 2 has no power.
Lit: indicate the Switch is successfully connecting to the
network at 10/100Mbps.
Blink: indicate that the Switch is actively sending or
receiving data over that port.
Off: indicate the Switch is not connecting to the network
at 10/100Mbps.
Lit: indicate the Switch port is providing 15.4 Watts PoE
power output.
Off: indicate the Switch port is not providing 15.4 Watts
PoE power output.
Pinout 1: V1 -
Pinout 2: V1+
Pinout 3: V2+
Pinout 4: V2 -
ISW-804PT-M12
2
3
Pinout 1: V1 -
V2 V1
Pinout 2: V1+
V2 V1
4 Pinout 3: V2+
1
Pinout 4: V2 -
INPUT
DC 48V