Installing The Development Kit - Atmel ATZB-EVB-24-SMA User Manual

4.3 Installing the Development Kit

18
In order to install the Development Kit, insert the ZDK Software and Documentation
CD into your PC CDROM. The ZDK installation wizard should start automatically.
Specify the installation path and follow the instructions.
As a result the ZDK file structure under the selected path will be generated on the PC,
which is described in 10.7.
During the ZDK deployment the following auxiliary software can be optionally
installed:



To complete the installation of VCP driver before use of the ZDK do the following:


USB to UART Bridge VCP driver for Windows platform
Java Runtime Environment (JRE).
Microsoft .NET Framework.
Connect ATZB-EVB (MeshBean) board to the USB port.
Windows should detect the new hardware. Follow the
instructions provided by the driver installation wizard.
Make sure that the driver is installed successfully and the
new COM port is present in the device list. Open the Device
Manager window shown in Figure 3:
Start/Control Panel/System/Hardware/Device
Manager.
ATZB-EVB-XXX-XXX User Manual
AVR-09-2011