Operation; Overview Of The Keypad; Operating Instructions; Weighing - KERN EMB 500-1BE Operating Instructions Manual

6 Operation

6.1

Overview of the keypad

Key
6.2

Operating instructions

6.2.1 Weighing

The balance is switched on by pressing the
The balance performs auto-diagnostics (for 2 s) and then displays "0".
If the weighing object is heavier than the weighing range the display indicates "E"
(=Overload).
The balance is switched off by pressing the

6.2.2 Taring

Place tare cup on the weighing plate and press
changes now to "0".The weight of the cup is now memorised.
Fill weighing object in the cup, read measuring value.
By pressing key, after the terminated weighing operation "0" appears again in
the display.
The taring procedure can be repeated several times, for instance to produce a mix-
ture of several components.
The limit is reached when the total weighing range has been used.
After removal of the tare cup the total weight appears as a negative value with „ -„
mark.
12
Pressed briefly
Switching the balance on
Tara-Function
Switching the balance off
Pressed for 10 sec
Unit changing
Adjusting function
key.
key once.
key. The weighing indication
EMB-BA-e-1434