Start Of Counting Procedure With Number Of Reference Piece Recommendation; Closing Of Counting Procedure - KERN FIS Operating Instruction

9.3 Start of counting procedure with number of reference piece
recommendation
F
Even if a proposal is made to apply additional reference pieces, the counting
function can be started by activating the
9.4

Closing of counting procedure

ON
OFF
38
Reference weight mass too
small. Proposal: apply 3
additional reference pieces.
Apply 3 additional reference
pieces
Automatic calculation
Reference weight with
calculated number of
reference pieces
Continuous display
Number of pieces according to
the loading of balance
F
key.
Return to weighing mode
(counting procedure can be
re-started)
FIS-BA-e-0512