11 SERVICE WORK ON THE CHASSIS
11.6
11.7
44
Installing the fork protector
G04200-11
Removing the fork legs
G04201-10
V01431-10
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws
.
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws
and take off the clamp.
–
Allow the brake caliper and brake line to hang loosely to the
side.
–
2
Loosen screws
. Remove the left fork leg.
–
3
Loosen screws
. Remove the right fork leg.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 42)
(
p. 84)