11.28
Installing the main silencer
11.29
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn filling escape and the damper "burns" out.
Not only is the noise level higher, but the performance characteristics change.
–
Position the main silencer.
–
Mount screws
E01967-11
–
Attach spring
Spring hook (50305017000C1)
–
Tighten screws
Guideline
Remaining screws,
chassis
E01966-11
Preparatory work
–
Remove main silencer. (
SERVICE WORK ON THE CHASSIS 11
1
with the washers, but do not tighten yet.
2
.
1
.
M6
10 Nm (7.4 lbf ft)
p. 58)
59