11 SERVICE WORK ON THE CHASSIS
11.37
11.38
11.39
68
F00398-01
Checking the frame
K01114-01
Checking the link fork
401520-01
Checking the throttle cable routing
–
Check that the chain guide is firmly seated.
»
If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracking, and deformation.
»
If the frame shows signs of damage, cracking, or deforma-
tion:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
–
Check the link fork for damage, cracking, and deformation.
»
If the link fork shows signs of damage, cracking, or defor-
mation:
–
Change the link fork.
Info
Always replace a damaged link fork. Repairing
the link fork is not authorized by KTM.
Preparatory work
–
Remove the fuel tank.
M6
10 Nm
(7.4 lbf ft)
p. 42)
(
p. 60)