11 SERVICE WORK ON THE CHASSIS
11.13
11.14
11.15
11.16
50
Lubricating the steering head bearing
H02387-01
Removing the start number plate
E01955-10
Installing the start number plate
E01956-10
Removing front fender
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated in
the course of removal and installation of the lower triple
clamp.
–
1
Remove screw
. Swivel the start number plate to one side.
–
Unhook the start number plate from the brake line and remove
it.
–
Position the brake line in holders on the start number plate.
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
Preparatory work
–
Remove the start number plate. (
(
p. 45)
(
p. 46)
1
.
p. 50)