–
Insert the new brake linings, insert pin
3
pins
.
Info
Always change the brake linings in pairs.
Make sure that decoupling plate
piston side brake lining.
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
F00406-10
point.
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount and tighten screw cap
O-ring.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
K01106-10
BRAKE SYSTEM 12
4
, and mount cotter
7
is mounted on the
A
.
p. 126)
1
2
with membrane
and the
83