11 SERVICE WORK ON THE CHASSIS
11.5
11.6
11.7
48
Removing the fork protector
F00047-10
Installing the fork protector
F00047-11
Removing the fork legs
S02315-10
–
1
Remove screws
on the left fork leg. Take off the clamp.
–
2
Remove screws
on the left fork leg. Take off the left fork
protector.
–
3
Remove screws
on the right fork leg. Take off the right
fork protector.
–
Position the fork protector on the left fork leg. Mount and
1
tighten screws
.
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws
.
–
Position the fork protector on the right fork leg. Mount and
3
tighten screws
.
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws
and take off the clamp.
–
2
Remove screws
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
M6
10 Nm (7.4 lbf ft)
M6
10 Nm (7.4 lbf ft)
p. 46)
(
p. 90)