Changing The Needle Thread - Bernina L860 User Manual

Threading

Changing the needle thread

Pulling a thread tie through the needle eye
NOTICE
The needle can be bent. A bent needle affects the stitch formation.
> Cut the tie in front of the needle eye and thread the needle individually.
> Cut the thread above the thread cone.
> Change the thread cone.
> Tie the threaded thread to the new thread. (see page 95)
> Pull the threaded end of the thread until the newly knotted thread is in front of the needle eye.
> Cut off the new thread behind the knotting.
> Remove the excess thread from the needle eye.
> Thread the new thread.
> Place the thread under the presser foot to the left.
96