Attaching The Spool Stabilizer - Bernina L860 User Manual

Setting up the machine
> Turn the thread guide to the left and right until the two positioning pins engage.
– The outer thread guide wires are parallel to the machine front.
> To retract the thread guide, push the thread guide down with a little pressure.

Attaching the spool stabilizer

For large thread cones, the spool stabilizer serves to stabilize the thread cone on the spool pin.
> For extremely conical spools, place the spool stabilizer onto the spool pin with the pointy end up.
> For slightly conical spools, place the spool stabilizer onto the thread spool pin with the pointy end down.
37