Table of Contents
Advertisement
Setting up the machine
Lifting the presser foot up/down with the knee lifter
Temporarily lifting the presser foot using the Free Hand System allows the sewing project to be repositioned
using both hands.
Prerequisite:
•
> To raise the presser foot, press the Knee Lifter with the knee out to the right and hold it in place.
> To lower the raised presser foot, slowly release the pressure on the Knee Lifter.
> To lower the already engaged presser foot, press the knee lifter all the way to the right and release
Swing the presser foot in/out
Swinging out the presser foot facilitates changing and threading the needle.
Prerequisite:
•
•
> Swing the presser foot front sideways to the left.
> To set the presser foot in the sewing position, lower the presser foot lifter or swing the presser foot
42
The Knee Lifter of the Free Hand System is attached. (see page 52)
slowly.
The needles are in the top position. (see page 49)
The presser foot is raised.
sideways to the right.
Advertisement
Table of Contents
